Marta Revilla León, DDS, MSD

Biography

Dr. Marta Revilla León graduated from dental school in 2004. She completed a 3-year graduate program in Aesthetic Dentistry at the Complutense University of Madrid in Spain and she obtained her graduate training in Prosthodontics and her Master in Dental Science at the University of Washington in Seattle. 

After her graduation in Prosthodontics at the University of Washington, Dr. Revilla returned to her hometown where she has been involved in a research group The main goal of the group is the validation and development of the dental applications of additive manufacturing technologies. 

Dr. Revilla has been working in private practice since 2004. She recently joined Texas A&M University College of Dentistry as Assistant Program Director of AEGD residency program. 

Research Interests

• 3D printing & Additive Manufacturing technologies.
• Facial and Intraoral scanners.
• Integration of the digital workflow on the clinical procedures.
• Zirconia in implant dentistry

Grants and Honors

• External grant. 2020 3M Innovation fellowship award from the American Dental Association
  (ADA), recognition included a total grant of $20,000.00 for research projects.
  
  
• External grant. Research grant of Dentsply – Investigator Initiated Studies (ISS) (October 2019),
  for the research project “Wear analysis at the titanium-cobalt chrome implant abutment
  interface”. Principal investigator. Total grant of $30,000.00 In-process project.
  
  
• External educational grant. Postdoctoral Training in General, Pediatric and Public Health
  Dentistry and Dental Hygiene. Sponsored by Health Resources and Service
  Administration. Co-Investigator. Total Awarded: $7,053,480.00.
  
  
• Research grant of ICOI - Implant Dentistry Research and Education Foundation - IDREF (March 2017), for the research project “Precision of Complete Arch Cr-Co Frameworks on Implants Fabricated by Selective Laser Melting (SLM) Additive Manufacturing Technology Before and after Ceramic Veneering”. Total grant of $25.000.
  
  
• Research grant of the Spanish Association of Prosthodontics (Sociedad Española Estomatológica y Estética – SEPES) (October 2015), for the research project “3D Metal Printing - Additive Manufacturing research: Selective Laser Melting (SLM) and Electron Beam Melting (EBM)”. Total grant of 6.000 euros.
  
  
• Graduate Research Competition on the Pacific Coast Society for Prosthodontics, Alaska, USA First place (June 2013), for the research project “Influence of fluorescence of lithium disilicate ceramic with different ceramic thickness and glaze pastes on the color perception”.
  
  
• The Dale Smith Graduate Prosthodontics Student Award. University of Washington, Seattle, USA (2010/2011). In recognition to the outstanding resident for the dedication and hard work.

Publications

1. Fracture resistance of additive manufactured and milled implant-supported interim crowns. Martín-Ortega N, Sallorenzo A, Casajús J, Cervera A, Revilla-León M, Gómez-Polo M. J Prosthet Dent.
   2021 [Epub ahead of print]. Position
2. Additively manufactured implant abutment screw-access guide to remove a cement-retained implant crown: A technique. Revilla-León M, Abaei DS, Tittle A, Zandinejad A. J Prosthet Dent 2021
   [Epub ahead of print].
3. An additively manufactured intraoral scan body for aiding complete-arch intraoral implant digital
   scans with guided integration of 3D virtual representation. Pérez-Giugovaz MG, Mosier M, Revilla-
   León M. J Prosthet Dent 2021 [Epub ahead of print].
4. Chemical composition, Knoop hardness, surface roughness, and adhesion aspects of additively
   manufactured dental interim materials. Revilla-León M, Morillo JA, Att W, Özcan M. J
   Prosthodont 2020 [Epub ahead of print]
5. Influence of the rinsing post-processing procedures on the manufacturing accuracy of vat-polymerized dental model material. Mostafavi D, Methani MM, Piedra-Cascón W, Zandinejad A, Revilla-León M. J Prosthodont 2020 [Epub ahead of print].
6. Analysis of different illuminance of the room lighting condition on the accuracy (trueness and
   precision) of an intraoral scanner. Revilla-León M, Subramanian SG, Att W, Krishnamurthy VR. J
   Prosthodont 2020 [Epub ahead of print].
7. Impact of the ambient light illuminance conditions on the shade matching capabilities of an intraoral scanner. Revilla-León M, Methani MM, Özcan M. J Esthet Restor Dent 2020 [Epub ahead of
   print].
8. Effect of fluorescent and nonfluorescent glaze pastes on lithium disilicate pressed ceramic color at different thicknesses. Revilla-León M, Sorensen JA, Nelson LY, Gamborena I, Yeh YM, Özcan
   M. J Prosthet Dent 2020 [Epub ahead of print].
9. Clinical study of the influence of ambient lighting conditions on the mesh quality of an intraoral
   scanner. Revilla-León M, Subramanian SG, Özcan M, Krishnamurthy VR. J Prosthodont
   2020;29(8):651-655.
10. Influence of scan body design on accuracy of the implant position as transferred to a virtual definitive implant cast. Revilla-León M, Smith Z, Methani MM, Zandinejad A, Özcan M. J Prosthet Dent
    2020 [Epub ahead of print].
11. Three-dimensional virtual representation by superimposing facial and intraoral digital scans with an additively manufactured intraoral scan body. Pérez-Giugovaz MG, Park SH, Revilla-León M. J
    Prosthet Dent 2020 [Epub ahead of print] Position
12. Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys. Revilla-León M, Al-Haj Husain N, Methani MM, Özcan M. J Prosthet Dent 2020 [Epub ahead of print].
13. Scanning accuracy of nondental structured light extraoral scanners compared with that of a dental-specific scanner. Piedra-Cascón W, Methani MM, Quesada-Olmo N, Jiménez-Martínez MJ,
    Revilla-León M. J Prosthet Dent 2020 [Epub ahead of print].
14. Flexural strength and weibull characteristics of stereolithography (SLA) additive manufactured (AM) versus milled zirconia. Revilla-León M, Husain NA, Ceballos L, Özcan M. J Prosthet Dent 2020
15. Comparison of conventional, photogrammetry, and intraoral scanning accuracy of complete-arch implant impression procedures evaluated with a coordinate measuring machine. Revilla-León M, Att W, Özcan M, Rubenstein J. J Prosthet Dent 2020 [Epub ahead of print].
16. Discrepancy at the implant abutment-prosthesis interface of complete-arch cobalt-chromium implant frameworks fabricated by additive and subtractive technologies before and after ceramic veneering. Revilla-León M, Sánchez-Rubio JL, Pérez-López J, Rubenstein J, Özcan M. J Prosthet Dent 2020
17. Influence of printing angulation on the surface roughness of additive manufactured clear silicone indices: An in vitro study. Revilla-León M, Jordan D, Methani MM, Piedra-Cascón W, Özcan M,
    Zandinejad A. J Prosthet Dent 2020
18. Accuracy of the implant replica positions on the complete edentulous additive manufactured cast. Olea-Vielba M, Jareño-García D, Methani MM, Martinez-Klemm I, Revilla-León M. J
    Prosthodont 2020;29:780-786. Position: Last author & Corresponding author
19. Esthetic dental perception comparisons between 2D- and 3D-simulated dental discrepancies. Revilla-León M, Campbell HE, Meyer MJ, Umorin M, Sones A, Zandinejad A. J Prosthet Dent
    2020;124:763-773.
20. Accuracy (trueness and precision) of a dual structured light facial scanner and inter-examiner
    reliability. Piedra-Cascón W, Methani MM, Meyer MJ, Revilla-León M. J Prosthet Dent
    2020;124:567-574.
21. Layperson and dental professional perception when evaluating their own virtually 2D or 3D simulated esthetic discrepancies. Revilla-León M, Ashby MT, Meyer MJ, Umorin M, Barrington JJ,
    Zandinejad A. J Prosthodont 2020;29:466-471.
22. Color dimensions of additive manufactured interim restorative dental material. Revilla-León M,
    Umorin MP, Özcan M, Piedra-Cascón W. J Prosthet Dent 2020;123:754-760.
23. Internal and marginal discrepancy of stereolithography (SLA) additively manufactured zirconia
    crowns. Revilla-León M, Methani MM, Morton D, Zandinejad A. J Prosthet Dent 2020;124:730-
    737.
24. Fiber-reinforced composite fixed dental prosthesis using an additive manufactured silicone index. Gonzalez AM, Piedra-Cascón W, Zandinejad A, Revilla-León M. J Esthet Restor Dent
    2020;32:626-633.
25. Digitally created 3-Piece additive manufactured index for direct esthetic treatment. Park S, Piedra-
    Cascón W, Zandinejad A, Revilla-León M. J Prosthodont 2020;29:436-442.
26. Maxillary zirconia and mandibular composite resin-lithium disilicate-PEEK fixed implant-supported rehabilitation for a completely edentulous patient with atrophic jaws: A novel restorative materials selection protocol. Cabello-Dominguez G, Perez-López J, Veiga-López B, Gonzalez D, Revilla-León M. J Prosthet Dent 2020;124:403-410.
27. Three-dimensional virtual representation by superimposing facial and intraoral digital scans with an additively manufactured intraoral scan body. Pérez-Giugovaz MG, Park SH, Revilla-León M. J
    Prosthet Dent 2020 [Epub ahead of print]
28. A vat-polymerized 3-dimensionally printed dual-material occlusal device: A dental technique.
    Piedra-Cascón W, Sadeghpour M, Att W, Revilla-León M. J Prosthet Dent 2020 [Epub ahead
    of print].
29. Workflow of a fiber-reinforced composite fixed dental prosthesis by using a 4-piece additive
    manufactured silicone index: A dental technique. Revilla-León M, Fountain J, Piedra-Cascón W,
    Özcan M, Zandinejad A. J Prosthet Dent 2020 [Epub ahead of print].
30. Digital workflow for an esthetic rehabilitation using a facial and intraoral scanner and an additive
    manufactured silicone index: A dental technique. Revilla-León M, Raney L, Piedra-Cascón W,
    Barrington J, Zandinejad A, Özcan M. J Prosthet Dent 2020;123:564-570.
31. Clinical study of the influence of ambient light scanning conditions on the accuracy (trueness and precision) of an intraoral scanner. Revilla-León M, Subramanian SG, Özcan M, Krishnamurthy VR. J Prosthodont. 2019 [Published ahead of print]
32. Intraoral digital scans-Part 1: Influence of ambient scanning light conditions on the accuracy (trueness and precision) of different intraoral scanners. Revilla-León M, Jiang P, Sadeghpour M, Piedra-Cascón W, Zandinejad A, Özcan M, Krishnamurthy VR. J Prosthet Dent 2019 [Published ahead of print]
33. Intraoral digital scans: Part 2-influence of ambient scanning light conditions on the mesh quality of different intraoral scanners. Revilla-León M, Jiang P, Sadeghpour M, Piedra-Cascón W, Zandinejad A, Özcan M, Krishnamurthy VR. J Prosthet Dent 2019 [Published ahead of print]
34. Maxillary zirconia and mandibular composite resin-lithium disilicate-modified PEEK fixed implant-supported restorations for a completely edentulous patient with an atrophic maxilla and mandible: A clinical report. Cabello-Domínguez G, Pérez-López J, Veiga-López B, González D, Revilla-León M. J Prosthet Dent 2019 [Published ahead of print]
35. Influence of scan body design and digital implant analogs on implant replica position in additively manufactured casts. Revilla-León M, Fogarty R, Barrington JJ, Zandinejad A, Özcan M. J Prosthet Dent 2019 [Published ahead of print]
36. Color dimensions of additive manufactured interim restorative dental material. Revilla-León M, Umorin M, Özcan M, Piedra-Cascón W. J Prosthet Dent 2019 [Published ahead of print]
37. Facially driven digital diagnostic waxing: New software features to simulate and define restorative outcomes. Piedra-Cascón W, Hsu V, Revilla-León M. Cur Oral Health Report 2019;6:284-294.
38. The potential of additive manufacturing technologies and their processing parameters for the fabrication of all-ceramic crowns: A review. Methani MM, Revilla-León M, Zandinejad A. J Esthet Restor Dent 2019 [Published ahead of print]
39. Digital workflow for an esthetic rehabilitation using a facial and intraoral scanner and an additive manufactured silicone index: A dental technique. Revilla-León M, Raney L, Piedra-Cascón W, Barrington J, Zandinejad A, Özcan M. J Prosthet Dent 2019 [Published ahead of print]
40. Silicone additive manufactured indices performed from a virtual diagnostic waxing for direct composite diastema closure combined with resin infiltration technique on white spot lesions: A case report. Revilla-León M, Fountain J, Piedra-Cascón W, Zandinejad A, Özcan M. J Prosthodont 2019;28:855-860.
41. Fracture resistance of additively manufactured zirconia crowns when cemented to implant supported zirconia abutments: An in vitro study. Zandinejad A, Methani MM, Schneiderman ED, Revilla-León M, Morton D. J Prosthodont 2019;28(8):893-897.
42. An update on applications of 3D printing technologies used for processing polymers used in implant dentistry. Revilla-León M, Sadeghpour M, Özcan M. Odontology 2019 [Published ahead of print]
43. Perception of occlusal plane that is nonparallel to interpupillary and commissural lines but with the maxillary dental midline ideally positioned. Revilla-León M, Meyer MJ, Barrington JJ, Sones A, Umorin MP, Taleghani M, Zandinejad A. J Prosthet Dent 2019;122(5):482-490.
44. Implant Prosthodontic discrepancy of complete-arch implant frameworks manufactured through selective laser melting additivemanufacturing technology using a coordinate measuring machine. Revilla-León M, Ceballos L, Özcan M. Int J Oral Maxillofac Impl 2019;34(3):698–707. [Epub head of print].
45. Metal additive manufacturing technologies: a literature review of current status and prosthodontic applications. Revilla-León M, Meyer MJ, Özcan M. Int J Comput Dent 2019;22:55-67.
46. Workflow description of additively manufactured clear silicone indexes for injected provisional restorations: A novel technique. Revilla-León M, Fountain J, Piedra-Cascón W, Özcan M, Zandinejad A. J Esthet Restor Dent 2019;31(3):213-221. [Epub head of print].
47. Facially generated and additively manufactured base plate and occlusion rim for treatment planing a complete-arch rehabilitation. Piedra-Cascón W, de Gopegui JP, Revilla-León M. J Prosthet Dent 2019;121:741-745.[Epub head of print].
48. A review on chemical composition, mechanical properties, and manufacturing workflow of additively manufactured current polymers for interim dental restorations. Revilla-León M, Meyer MJ, Zandinejad A, Özcan M.  J Esthet Restor Dent 2019;31:51-57. 
49. Laboratory workflow to obtain long-term injected resin composite interim restorations from an additive manufactured esthetic diagnosis template. Piedra-Cascón W, Parra-Nuñez I, Revilla-León M.  J Esthet Restor Dent 2019;31:13-9. 
50. Discrepancy of complete-arch titanium frameworks manufactured using selective laser melting and electron beam melting additive manufacturing technologies. Revilla-León M, Ceballos L, Martinez-Klemm I, Özcan M. J Prosthet Dent 2018;120:942-7.
51. Digital tools and 3D printing technologies integrated into the workflow of restorative treatment: A clinical report. Revilla-León M, Fábrega GJ, Sánchez-Rubio JL, Besné-Torre A, Özcan M. J Prosthet Dent 2019;121:3-8.
52. Digital workflow for the design and additively manufacture of a splinted framework and custom tray for the impression of multiple implants: A dental technique. Piedra Cascon W, Revilla-León. J Prosthet Dent 2018;120:805-11.
53. Additive manufacturing technologies used for processing polymers: Current status and potential application in prosthetic dentistry. Revilla-León M, Özcan M. J Prosthodontics 2019;28:146-158.
54. A report of diagnostic digital workflow for aesthetic dental rehabilitation using additive manufacturing technologies. Revilla-León M, Sánchez-Rubio JL, Besné-Torre A, Özcan M. Int J Esthet Dent 2018;13:184-96.
55. Impression technique for complete arch with multiple implants using additive manufacturing technologies. Revilla-León M, Sánchez-Rubio JL, Özcan M. J Prosthet Dent 2017;117:714-20.
56. Position Accuracy of Implant Analogs on 3D Printed Polymer versus Conventional Dental Stone Casts Measured Using a Coordinate Measuring Machine. Revilla-León M, Gonzalez-Martín O, Pérez López J, Sánchez-Rubio JL, Özcan M. J Prosthodont 2018;27:560-7.
57. 3D Metal Printing – Additive Manufacturing Technologies for Frameworks of Implant-borne Fixed Dental Prosthesis. Revilla-León M, Martinez-Klemm I, García Arranz J, Özcan M. Eur J Prosthodont Res Dent 2017;25:143-7.
58. Marginal and internal gap of handmade, milled and 3D printed additive manufactured patterns for pressed lithium disilicate onlay restorations. Revilla-León M, Olea-Vielba M, Esteso-Saiz A, Martinez-Klemm I, Özcan M. Eur J Prosthodont Res Dent 2018;26:31-8.
59. Additive Manufacturing Technologies Used for 3D Metal Printing in Dentistry. Revilla-León M, Özcan M. Current Oral Health Reports 2017;4:201-208.
60. New fabrication method using additive manufacturing technologies for the pattern of a pressed lithium disilicate onlay restorations. Revilla-León M, Olea-Vielba M, Esteso-Saiz A, Martinez-Klemm I, Reuss Rodríguez-Vilaboa JM, Özcan M BDS 2017;20:149-56.
61. Analysis of discrepancy of complete arch titanium frameworks manufactured using selective laser melting and electron beam melting additive manufacturing technologies. Revilla-León M, Ceballos L, Martínez-Klemm I, Özcan M. Poster International Association for Dental Research - IADR, San Francisco, USA (March 2017)